ProSoft Technology 5105-103M-PDPS - Manual (Page 24)

Start Here 5105-103M-PDPS ♦ ProLinx Gateway
User Manual IEC 60870-5-103 Master to PROFIBUS Slave Gateway
Page 24 of 144 ProSoft Technology, Inc.
November 24, 2010
Step 4: Sector (Data Set) Configuration
For each session (slave), you must configure one or more sectors. A sector is a
data set defined by the vendor. Each sector is identified by the Common ASDU
Address
parameter in the [IEC-103 Master Session x Sector 0] area in the
configuration. This area also contains some parameters that will affect the
module initialization procedure.
Note: The actual number of available sectors per session will depend on the total number of
sessions and sectors configured. The recommended maximum number of sectors is three.
Repeat this step for each sector used by the application. The module will only
use the sectors configured in the previous step.