ProSoft Technology 5105-103M-PDPS - Manual (Page 17)

5105-103M-PDPS ♦ ProLinx Gateway Start Here
IEC 60870-5-103 Master to PROFIBUS Slave Gateway User Manual
ProSoft Technology, Inc. Page 17 of 144
November 24, 2010
1.6 Configure the Module
Because the task of configuring the ProLinx module can be complicated, ProSoft
Technology has provided a configuration tool called ProSoft Configuration
Builder (PCB) that will help you with the following tasks:
Creating a configuration project
Setting module parameters
Configuring the protocols
o
103M (page 31)
o
PDPS (page 41)
Copying the project to the module.
The following topics of this chapter explain each task step-by-step.
1.6.1 Installing ProSoft Configuration Builder Software
You must install the ProSoft Configuration Builder (PCB) software to configure
the gateway. You can always get the newest version of ProSoft Configuration
Builder from the ProSoft Technology website.
Installing ProSoft Configuration Builder from the ProSoft website
1 Open your web browser and navigate to http://www.prosoft-
technology.com/pcb
2 Click the D OWNLOAD H ERE
link to download the latest version of ProSoft
Configuration Builder.
3 Choose S AVE
or S
AVE F ILE
when prompted.
4 Save the file to your Windows Desktop, so that you can find it easily when
you have finished downloading.
5 When the download is complete, locate and open the file, and then follow the
instructions on your screen to install the program.
If you do not have access to the Internet, you can install ProSoft Configuration
Builder from the ProSoft Solutions Product CD-ROM, included in the package
with your gateway.