ProSoft Technology PLX81-EIP-61850 - Manual (Page 82)

Reference PLX8x-EIP-61850 ♦ Communication Gateway
User Manual Server to
IEC 61850 Client
Page 82 of 167 ProSoft Technology, Inc.
July 2, 2015
5.1.3 Specifications - IEC 61850 Client
 Supports up to 20 IEDs
 Send commands from the PAC to the IED using Control Types
o Direct-with-Normal-Security
o Select Before Operate (SBO)-with-Normal-Security
o Direct-with-Normal-Security
o Select Before Operate (SBO)-with-Normal-Security
ASCI Basic Conformance
SCSMs supported
 SCSM: IEC 61850 8.1(MMS) used
Generic substation event model (GSE)
 Subscriber
ASCI Model Conformance
Reporting
 Buffered Report Control Block (BRCB)
 Unbuffered Report Control Block (URCB)
GOOSE
 entryID, DataReflnc
Control
 Direct-with-Normal-Security
 SBO-with-Normal-Security
 Direct-with-Enhanced-Security
 SBO-with-Enhanced-Security
Logical Nodes
 IEC 61850 Logical Nodes, including Logical Nodes
for Hydro Power Plants and Logical Nodes for
Wind Power Plants
Configurable Parameters
 MMS Command Delay
Status Data
 Status available per node
 Report and GOOSE status available
 High-level status data available from Modbus
TCP/IP Client through the MNET server (for
example PLC or PAC)
5.1.4 Specifications - SNTP/NTP Client
The gateway supports a Simple Network Time Protocol (SNTP/NTP) client
service that can synchronize the gateway’s time by periodic update requests to a
Coordinated Universal Time (UTC) system. You can configure the SNTP/NTP
server details in ProSoft 61850 Configuration Manager. The resolution of the time
is in milliseconds (ms).
Configurable Parameters
 SNTP/NTP server synchronization rate
(in minutes)
 SNTP/NTP server Address