ProSoft Technology PLX81-EIP-61850 - Manual (Page 62)

Diagnostics and Troubleshooting PLX8x-EIP-61850 ♦ Communication Gateway
User Manual Server to
IEC 61850 Client
Page 62 of 167 ProSoft Technology, Inc.
July 2, 2015
In this example, this Tag Name is mapped to IEC 61850 Path
RREC1$CO$BlkRec$Oper$origin$orIdent. The IEC 61850 Standard identifies
orIdent is the originator identification, and shows the address of the originator
who caused the change of the value. Data for which there are several levels of
hierarchy are considered complex, as well as some longer data types. The data
type orIdent is Octet64.
To Print the Data
Click the Print button to print the current data.
To Start/Stop Data Update
Click the Start/Stop button to start or stop updating the data. Note that the
appearance of this button changes when you toggle between start and stop.
NOTE: All Tag Monitor functions require that you install the MODE 3 jumper on
the module. Refer to Setting Jumpers on page 11.
4.6 ProSoft ProSoft 61850 Configuration Manager Diagnostics
4.6.1 IEC 61850 Client Diagnostics
The following sets of IEC 61850 Client diagnostics data are available from the
gateway:
 Configuration Settings
 Driver Status
 Remote Node Config
 Remote Node Status
 Report Status
 GOOSE Subscription Status