ProSoft Technology PLX81-EIP-61850 - Manual (Page 18)

Configuring the PLX8x-EIP-61850 Gateway PLX8x-EIP-61850 ♦ Communication Gateway
User Manual Server to
IEC 61850 Client
Page 18 of 167 ProSoft Technology, Inc.
July 2, 2015
5 Enter a new name in P ROJECT N AME , and any notes in N OTES , and then click
OK.
6 Save the project by choosing F ILE > S AVE A S and entering a name for the
project.
Note: You need a separate Configuration Manager file for each gateway. You can run multiple
instances of the Configuration Manager software at the same time.
Note that the diagram in the Network View does not exactly match the physical
hardware. In reality, the IED connects to the 61850 “side” of the gateway, while
the EtherNet/IP device connects to the other side. Typically these three devices
are connected across a network, rather than connected directly to each other.
2.4 Exporting a Project from the Configuration Manager
You can export an ProSoft 61850 Configuration Manager file that you created on
your PC. Exporting a project includes all the original IED files that you used to
create the project into the export file. This allows someone on a different PC to
import your configuration file and have all the CID/SCD/ICD files that are part of
your project.
Use F ILE > E XPORT C ONFIGURATION to export your project.