PLANET MAP-3100 - Manual (Page 86)

3.6.2 Tools > TFTP
TFTP page is shown in Figure 3.6.2.1.
Figure 3.6.2.1: TFTP page
To use TFTP:
a. Enter the destination IP address of remote TFTP server.
b. Click on “Operation” drop down menu to select “put”, “get” or “get and reboot” file to
remote TFTP server.
c. Enter the File Name to put or get.
d. Click on “Type of File” drop down menu to select “config”, “firmware”, “ipsec x509
local”, “ipsec x509 remte”, or “ipsec rsa” file.
e. Click on “Execute” button to confirm operation.
Page 86 of 102