PLANET MAP-3100 User Manual
Page 25
different device on a computer network utilizing the Internet Protocol standard.
Specify the Static IP address.
• Netmask – Specify subnet mask for this IP.
• “Apply” button – Click on “Apply” button if you have made any changes. New
settings are active after the device reboot.
4. If ISP or network assigns the IP address dynamically using a DHCP server, select
“DHCP” radio button and press Apply. Using this option, all the network related
configuration will be provided by ISP or network.
Figure 3.3.2.3: DHCP Client configuration page
5. PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulating
PPP frames in Ethernet compression. Widely adapted by ADSL service provider.
Basic authentication based on username and password is required for this type of
connection. Select this radio button and press Apply to configure the following fields
as shown in Figure 3.3.2.4.
Figure 3.3.2.4: PPPoE configuration page
Page 25 of 102