PLANET MAP-3100 - Manual (Page 52)

Figure 3.4.5.2: NTP – add page
NTP server - add page contain the following parameter:
¾ Server – Enter the NTP server name.
¾ Comments - Enter NTP server comments.
¾ Active – Click on “Active” drop down menu to enable or disable this NTP
server.
¾ “Apply” button – Click on “Apply” button to confirm add NTP server. New
settings are active after the device reboot.
f. If you select to edit existing NTP server, a page similar to Figure 3.4.5.2 with
configured settings will be displayed.
3.4.6 Service > Traffic Shaping
(MAP-3100 only)
Traffic Shaping will limit bandwidth allocated to each user. Traffic Shaping configuration page
is shown in Figure 3.4.6.1.
Page 52 of 102