PLANET MAP-3100 - Manual (Page 72)

3.5.3 Management > SNMPD
Simple Network Management Protocol ( SNMP ) used to monitor devices for conditions that
warrant administrative attention. SNMP configuration page is shown in Figure 3.5.3.1.
Figure 3.5.3.1: SNMP configuration page
To configure SNMP:
¾ Click on “Active” drop down menu to enable or disable SNMP management.
¾ Click on “Version” drop down menu to select “v1 or v2c”, “v3”, or “all” SNMP
version.
¾ Enter the SNMP port number.
Page 72 of 102