PLANET MAP-3100 - Manual (Page 54)

Figure 3.4.6.2: Traffic Shaping – add page
Traffic Shaping - add page contain the following parameter:
¾ Protocol – Click on “Protocol” drop down menu to select “tcp”, “udp”, or
“both” protocol of Traffic Shaping.
¾ Port – Enter the Traffic Shaping port number.
¾ Min Size – Enter the minimum packet size of Traffic Shaping.
¾ Max Size – Enter the maximum packet size of Traffic Shaping.
¾ Priority – Click on “Priority” drop down menu to select priority “Background”,
“Video”, “Voice” or “Best effort”.
¾ Comments – Enter Traffic Shaping comments.
¾ Active – Click on “Active” drop down menu to enable or disable this entry.
¾ “Apply” button – Click on “Apply” button to confirm add Traffic Shaping.
New settings are active after the device reboot.
i. If you select to edit existing Traffic Shaping, a page similar to Figure 3.4.6.2 with
configured settings will be displayed.
3.4.7 Service > PPTP Server (MAP-3100 only)
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
( VPNs ). PPTP Server configuration page is shown in Figure 3.4.7.1.
Page 54 of 102