PLANET MAP-3100 - Manual (Page 24)

3.3.2 Network > WAN
(MAP-3100 only)
WAN (Wide Area Network) are used to connect local area networks (LANs) to other networks
through your ISP (Internet Service Provider). WAN configuration page is shown in Figure
3.3.2.1.
Figure 3.3.2.1: WAN configuration page
To configure WAN:
1. Choose option either for Static, DHCP or PPPoE.
2. Click on “Apply” button.
3. If you choose for Static option, Static IP configuration page will display as shown in
Figure 3.3.2.2.
Figure 3.3.2.2: Static IP configuration page
Static IP configuration page contains the following parameters:
• IP – IP address is a unique address used to identify and communicate with
Page 24 of 102