PLANET MAP-3100 - Manual (Page 63)

3.4.12 Service > Zero Config
(MAP-3100 only)
Zero Config configuration page is shown in Figure 3.4.12.1.
Figure 3.4.12.1: Zero Config configuration page
To configure Zero Config:
a. Click on “Active” drop down menu enable or disable Zero Config service.
b. Click on “Handle Client Proxy” drop down menu to enable or disable it.
c. Enter the port number used in Proxy Login.
d. Click on “Handle Static IP Client” drop down menu to enable or disable it.
e. Click on “Apply” button if you have made any changes. New settings are active after
the device reboot.
Page 63 of 102