PLANET MAP-3100 - Manual (Page 7)

1 Overview
Thank you for choosing the PLANET MAP-3100 / MAP-3120 Wireless Mesh Access Point.
The MAP-3100 / MAP-3120 allows a wireless mesh network to be rapidly deployed with
minimal configuration required by the end user. This user’s guide describes the detailed web
interface configuration options.
1.1 MAP-3100 Variants
Currently, there are two MAP-3100 variants available:
MAP-3100: supports both Layer 2 and Layer 3 operations.
MAP-3120: support Layer 2 operation only.
Throughout the manual, the MAP-3100 will be used to collectively refer to both models.
Where the functionality of the variance, the actual model name will be used.
1.2 Package Content
The following items should be included:
Š Indoor Mesh AP x 1
Š Power Adapter x 1
Š 2.4/5GHz Dipole Antenna x 2
Š Quick Start Guide x 1
Š Management Utility and User's manual CD x 1
If any of the above items are damaged or missing, please contact your dealer immediately.
1.3 Features
Š Dual wireless interfaces for independent Backhaul link and local clients connection
Š 2 x IEEE 802.11a/b/g adapters
Š 2 x reverse SMA connector
Š Supports full dynamic routing (layer 3) among all node APs (MAP-3100)
Š OLSR, optimized link state routing protocol
Š Self-healing and Self-configuration, Plug and Play installation
Š Supports layer 2 operation (MAP-3100 / MAP-3120)
Š Adjustable output power
Š Central management software
Š AES backhaul communication
Š IEEE 802.1q VLAN, multiple VLAN/SSID supports
Š IEEE 802.1x, IEEE 802.1i WPA/ WPA2, and VPN pass-through mechanisms
Š Supports Wireless Separation, Watchdog mechanism
Š QoS for bandwidth control or traffic prioritizing
Š Supports SNMP v2c, v3
Š IEEE 802.3af Power over Ethernet capable
Page 7 of 102