PLANET MAP-3100 - Manual (Page 44)

Figure 3.4.1.2: DHCPD – add page
DHCPD – add page contain the following parameter:
a. Interface – Click on “Interface” drop down menu to select interface.
b. Subnet – Enter the interface network address.
c. IP Start – Enter the IP address of IP start.
d. IP End – Enter the IP address of IP end.
e. Netmask – Enter the network mask for this network address.
f. Max Lease – Enter the value of Max Lease.
g. Lease – Enter the value of Lease.
h. Domain – Enter the name of Domain.
i. DNS – Enter the network address of DNS.
j. Router – Enter the network address of Router.
k. Comments – Enter the DHCPD comments.
l. Active – Click on “Active” drop down menu to select enable or disable this interface.
m. “Apply” button – Click on “Apply” button to confirm add DHCPD. New settings are
active after the device reboot.
Page 44 of 102