8 network > l2tpc (map-3100 only), Network > l2tpc (map-3100 only) 40 – PLANET MAP-3100 User Manual
Page 40
3.3.8
Network > L2TPC
(MAP-3100 only)
Layer 2 Tunneling Protocol ( L2TP ) is a tunneling protocol used to support virtual private
networks (VPNs). L2TPC serves as a L2TP client that creates a tunnel through existing
network to the designated peer computer or network. L2TCP configuration page is shown in
Figure 3.3.8.1.
Figure 3.3.8.1: L2TPC configuration page
To configure L2TPC:
¾ Click
on
“Active” drop down menu to enable or disable L2TPC service.
¾
Enter the L2TP LNS address.
¾
Enter L2TP username.
¾
Enter L2TP password.
¾
Re-enter L2TP password to confirm it.
¾ Click
on
“Apply” button if you have made any changes. New settings are
active after the device reboot.
Page 40 of 102