PLANET MAP-3100 - Manual (Page 41)

3.3.9 Network > OLSR
(MAP-3100 only)
Optimized Link State Routing protocol is a protocol to connect mobile ad-hoc networks. It is a
link-state routing protocol that collects data about available network and then calculates an
optimized routing table. OLSR configuration page is shown in Figure 3.3.9.1.
Figure 3.3.9.1: OLSR configuration page
To configure OLSR:
a. Click on “Active” drop down menu to enable or disable OLSR service.
b. Enter the value of TOS. Type Of Service (TOS ). Value for the IP header of control
traffic.
0 : normal service.
2 : minimize monetary cost.
4 : maximize reliability.
8 : maximize throughput.
Page 41 of 102