PLANET MAP-3100 User Manual
Page 26
PPPoE configuration page contain the following parameter:
• “Active” - Click on “Active” drop down menu to select enable or disable PPPoE
service.
• Authentication type- Choose the “PAP/CHAP” PPP control protocols.
• Username – Specify PPPoE service username.
• Password – Specify PPPoE service password.
• Reconfirm password – Re-enter PPPoE service password to confirm it.
• “Apply” button - Click on “Apply” button if you have made any changes. New
settings are active after the device reboot.
Note
1. If your Ethernet network that connect to WAN port supports VLAN
tagging and you plan to make the Mesh Network route for different
purpose, you can use the “Add VLAN Tag” button to create different
VLAN for WAN interface.
2. Only
the
default WAN is un-tagged. Any other newly inserted WAN
interface will be tagged follow the ID setting that range from 1 to 4095.
Maximum is 15 virtual WAN interfaces are allowed.
Page 26 of 102