PLANET MAP-3100 User Manual
Page 38
Routes – add page contain the following parameter:
¾
Subnet – Enter the IP address of destination subnet.
¾
Netmask – Enter the IP address of destination subnet network mask.
¾
Direct – Click on “Direct” drop down menu to select “Direct” or “Indirect”
route.
¾
Device – Click on “Device” drop down menu to select device. For example,
WAN, VLAN0, VLAN1……
¾
Comments – Enter the interface comments.
¾
Active – Click on “Active” drop down menu to enable to disable this
interface.
¾
“Apply” button – Click on “Apply” button to confirm add route. New settings
are active after the device reboot.
c.
If you select to edit existing route, a page similar to Figure 3.3.6.2 with configured
settings will be displayed.
Note
In default, the gateway for MAP-3120 should be configured in DNS Setting
page
Page 38 of 102