PLANET MAP-3100 - Manual (Page 55)

Figure 3.4.7.1: PPTP Server configuration page
To configure PPTP Server:
a. Click on “Active” drop down menu to enable or disable PPTP Server service.
b. Enter the PPTP Server IP address.
c. Enter Client Start address.
d. Enter Client End address.
e. Click on top “Apply” button if you have made any changes. New settings are active
after the device reboot.
f. From “Configuration” field, you can select “Modify” or “Remove” PPTP user.
g. If you select to add new PPTP user entry, PPTP User – add page will display as shown
in Figure 3.4.7.2.
Page 55 of 102