PLANET MAP-3100 User Manual
Page 83
• Interval – specify the interval of report to NMS server
• Comments – additional comments for the entry
• Active – Enable or Disable this entry.
• Press
“Save changes“ to save the configuration
• Reboot to enable new settings
Note
1. At Layer 2 mode, the NMS Server IP address is required. Otherwise,
the NMS server can never poll the device information once this Mesh
node existed in the network.
2. At Layer 3 mode, the NMS Server IP address is not required. However,
to make the management more secured, we would suggest to key in at
least one manger’s IP address for secured access.
Page 83 of 102