10 service > radius, Service > radius 60, Service > radius – PLANET MAP-3100 User Manual
Page 60
3.4.10
Service > RADIUS
Remote Authentication Dial In User Service ( RADIUS ) is an AAA ( authentication ,
authorization and accounting ) protocol for applications such as network access or IP mobility.
RADIUS client will verify authentication push by RADIUS server. RADIUS client configuration
page is shown in Figure 3.4.10.1.
Figure 3.4.10.1: RADIUS client configuration page
To configure RADIUS client:
a. Click
on
“Active” drop down menu to enable or disable RADIUS client.
b.
Enter the NAS ID.
c.
Enter the Called Station ID.
d.
Enter the NAS Port number.
e.
Enter the NAS Port Type.
f.
Enter the value of Interim Update Interval.
g.
Click on top “Apply” button if you have made any changes. New settings are active
after the device reboot.
Page 60 of 102