PLANET MAP-3100 User Manual
Page 19
Figure 3.2.2.1: Syslog configuration page
To use Syslog:
a. Click
on
“Active” drop down menu to enable or disable System Logging service.
b. Click
on
“Klog” drop down menu to enable or disable Kernel Logging service.
c.
Select the logging level. There are 8 levels. If “Debug” is selected, all messages will be
recorded.
d. Click
on
“Remote Syslog” drop down menu to enable or disable remote syslog
server.
e.
Enter the remote syslog server address.
f. Click
on
“Apply” button if you have made any changes. New settings are active after
the device reboot.
Page 19 of 102