PLANET MAP-3100 User Manual
Page 51
Figure 3.4.5.1: NTP configuration page
To configure NTP:
a. Click
on
“Active” drop down menu to enable or disable NTP service.
b. Click
on
“Time Zone” drop down menu to select suitable time zone.
c.
Click on top “Apply” button if you have made any changes. New settings are active
after the device reboot.
d. From
“Configuration” field, you can select “Modify” or “Remove” NTP server.
e.
If you select to add new NTP server entry, NTP server – add page will display as
shown in Figure 3.4.5.2.
Note
Please also make sure “DNS settings” in section 3.3.1 is well configured to
make this feature functions.
Page 51 of 102