Utility commands, Utility commands -62 – RIGOL DM3058 User Manual
Page 87

RIGOL
Programming Guide for DM3058/DM3058E
3-62
:UTILity Commands
The commands set the communication parameters. Please make sure that
communication interface has been connected stably to avoid errors or abnormal
phenomena.
The commands mainly include:
:UTILity:INTErface:LAN:DHCP*
:UTILity:INTErface:LAN:AUTOip*
:UTILity:INTErface:LAN:MANUip*
:UTILity:INTErface:LAN:IP*
:UTILity:INTErface:LAN:MASK*
:UTILity:INTErface:LAN:GATEway*
:UTILity:INTErface:LAN:DNS*
:UTILity:INTErface:GPIB:ADDRess*
:UTILity:INTErface:RS232:BAUD
:UTILity:INTErface:RS232:PARIty
Note*: The GPIB and LAN interfaces are only supported by DM3058.