RIGOL DM3058 User Manual
Page 167

RIGOL
Programming Guide for DM3058/DM3058E
5-18
1. MEAS
Command Format:
MEAS?
MEAS1?
MEAS2?
Function:
MEAS? - Queries the measured value of the multimeter. If both the two displays
are opened, the query returns 2 values, or else only the value on main display is
returned.
MEAS1? - Queries the measured value from main display.
MEAS2? - Queries the measured value from vice display. If the display is disabled,
an Execute error may generate.
2. VAL
Command Format:
VAL?
VAL1?
VAL2?
Function:
VAL? - Queries the measured value of the multimeter. If both the two displays are
opened, the query returns 2 values, or else only the value on main display is
returned; if one of the display is empty, the query returns the next trigger value.
VAL1? - Queries the measured value from main display; if the display is empty,
the query returns the next trigger value.
VAL2? - Queries the measured value from vice display; if the display is empty, the
query returns the next trigger value; if the display is disabled, an Execute error
may generate.