RIGOL DM3058 - Manual (Page 84)

RIGOL
Programming Guide for DM3058/DM3058E 3-59
Explanations:
:TRIGger:AUTO:HOLD:SENSitivity? – Queries the current delay sensitive of auto
trigger.
:TRIGger:AUTO:HOLD:SENSitivity {|MIN|MAX|DEF} Sets the desired
delay sensitive of auto trigger. For the parameter range, see table below:
Table 3-11 Delay sensitive of auto trigger
Parameter Sensitive
0 (MIN) 0.01%
1 0.1%
2 (DEF) 1%
3 (MAX) 10%
Return Format:
The query returns: 0, 1, 2 or 3 (see table 3-11).
5. :TRIGger:SINGle
Command Format:
:TRIGger:SINGle?
:TRIGger:SINGle {|MIN|MAX|DEF}
Function:
The commands query and set the number of sample in single trigger mode.
Explanations:
:TRIGger:SINGle? – Queries the number of sample under current single trigger.
:TRIGger:SINGle {|MIN|MAX|DEF} – Sets the required sample number
in single trigger mode.
Parameter:
Name Type Range Default
Consecutive
Integer
1~2000 1
Return Format:
The query returns the number of sample under current single trigger.