RIGOL DM3058 - Manual (Page 164)

RIGOL
Programming Guide for DM3058/DM3058E 5-15
1. AUTO
Command Format:
AUTO
AUTO?
Function:
The commands set and query the auto range mode of the multimeter.
Explanations:
AUTO - Enables the multimeter enter the auto range mode. If the mode is
forbidden to be selected (as the Diode and Continuity function are active), an
Execute error may generate.
AUTO? – Queries if the multimeter is in auto range mode.
Return Format:
The query returns 1(Yes) or 0 (No).
2. FIXED
Command Format:
FIXED
Function:
The command enables the multimeter exit the auto range mode and switches
into Manual mode, the current range is selected.
3. RANGE
Command Format:
RANGE
RANGE1?
RANGE2?
Function:
RANGE - Sets the range of main display, see table below,
thereinto, the ranges relate to the functions (voltage, current, resistance and so