Commands in this manual, Commands in this manual -5 – RIGOL DM3058 User Manual
Page 10

RIGOL
Programming Guide for DM3058/DM3058E
1-5
Commands in this Manual
To meet the needs from different users, DM3058/DM3058E provides three command
systems:
RIGOL commands
Compatible Agilent commands
Compatible Fluke commands
To switch between commands listed above, use the command shown below:
Command Format:
CMDSET {RIGOL|AGILENT|FLUKE}
CMDSET?
Function:
The commands set and query the command system.
Explanations:
The Agilent commands in this manual refers to Agilent 34401A, and the Fluke
Commands refers to Fluke 45, except where noted.
The
RIGOL commands is to be used by default when power-on.