RIGOL DM3058 - Manual (Page 67)

RIGOL
Programming Guide for DM3058/DM3058E 3-42
Name Type Range Default
Consecutive
Integer
1 Ω~2000 Ω 10
Explanations:
The parameter is a consecutive integer ranging form 1 Ω to 2000 Ω. The default
resistance is 10 Ω.
Example:
Sets the resistance limit under continuity measurement to 1kΩ.
:MEASure:CONTinuity 1000
32. :MEASure:DIODe?
Command Format:
:MEASure:DIODe?
Function:
The command queries the voltage of the ends of diode.
Explanations:
The beep condition under diode measurement is 1 V≤V
measured
≤2.4 V by default.
Return Format:
The query returns the measured voltage on the diode in scientific notation, such
as: 4.492510e-04, the unit is V.
33. :MEASure:CAPacitance?
Command Format:
:MEASure:CAPacitance?
Function:
The command queries the measured capacitance value.
Explanations:
The command is unavailable in double-display.