RIGOL DM3058 - Manual (Page 160)

RIGOL
Programming Guide for DM3058/DM3058E 5-11
8. MAXSET
Command Format:
MAXSET
Function:
The command enables the multimeter enter MAX operation with value> as maximum.
Explanations:
could be a signed integer, a signed real number without
exponent, or a signed real number with exponent, and the new value must be
greater than last one. IF is overrange, an Execution Error may
generate. The auto range function is disabled in this mode.
9. MIN
Command Format:
MIN
Function:
The command enables the multimeter enter MIN operation with current reading
as minimum.
Explanations:
If the multimeter has been in MIN mode, the minimum value will be shown on the
screen. Note the auto range function is disabled in this mode.
10. MINSET
Command Format:
MINSET
Function:
The command enables the multimeter enter MIN operation with
as minimum.