Function2:resistance, Function2:fresistance, Function2:capacitance – RIGOL DM3058 User Manual
Page 48

RIGOL
Programming Guide for DM3058/DM3058E
3-23
Explanations:
The available measurements to main-display could only be ACV, FREQUENCY,
PERIOD after this command.
10. :FUNCtion2:RESistance
Command Format:
:FUNCtion2:RESistance
Function:
The command sets the vice-display to 2-wire resistance measurement.
Explanations:
The available measurements to main-display could only be RESISTANCE after this
command.
11. :FUNCtion2:FRESistance
Command Format:
:FUNCtion2:FRESistance
Function:
The command sets the vice-display to 4-wire resistance measurement.
Explanations:
The available measurements to main-display could only be FRESISTANCE after
this command.
12. :FUNCtion2:CAPacitance
Command Format:
:FUNCtion2:CAPacitance
Function:
The command sets the vice-display to capacitance measurement.