Function2:voltage:dc, Function2:voltage:ac, Function2:current:dc – RIGOL DM3058 User Manual
Page 46

RIGOL
Programming Guide for DM3058/DM3058E
3-21
Explanations:
The command is valid only when vice-display is enabled.
Return Format:
The command returns the measured value of the vice-display.
4. :FUNCtion2:VOLTage:DC
Command Format:
:FUNCtion2:VOLTage:DC
Function:
The command sets the vice-display to DC voltage measurement.
Explanations:
The available measurements to main-display could only be DCV, DCI, ACV or ACI.
5. :FUNCtion2:VOLTage:AC
Command Format:
:FUNCtion2:VOLTage:AC
Function:
The command sets the vice-display to AC voltage measurement.
Explanations:
The available measurements to main-display could only be DCV, DCI, ACV, ACI,
FREQUENCY, PERIOD after this command.
6. :FUNCtion2:CURRent:DC
Command Format:
:FUNCtion2:CURRent:DC
Function:
The command sets the vice-display to DC current measurement.