RIGOL DM3058 - Manual (Page 82)

RIGOL
Programming Guide for DM3058/DM3058E 3-57
1. :TRIGger:SOURce
Command Format:
:TRIGger:SOURce?
:TRIGger:SOURce {AUTO|SINGLE|EXT}
Function:
The commands query and set the trigger source.
Explanations:
:TRIGger:SOURce? – Queries the trigger source used currently.
:TRIGger:SOURce {AUTO|SINGLE|EXT} – Sets the trigger source to be used. The
parameter AUTO, SINGLE, EXT denotes Auto trigger, Single trigger and External
trigger, separately.
Return Format:
The query returns: AUTO, SINGLE or EXT.
2. :TRIGger:AUTO:INTErval
Command Format:
:TRIGger:AUTO:INTErval?
:TRIGger:AUTO:INTErval
Function:
The commands query and set the interval of auto trigger.
Parameter:
Name Type Range
Consecutive
Integer
See Explanations below
Explanations:
:TRIGger:AUTO:INTErval? – Queries the interval of auto trigger.
:TRIGger:AUTO:INTErval – Sets the desired interval of auto trigger.
Different rate has different intervals:
In Fast measruement, the default interval is 8 ms and the available range is within
8 ms and 2000 ms;