Function2, Function2:value1, Function2:value2 – RIGOL DM3058 User Manual
Page 45

RIGOL
Programming Guide for DM3058/DM3058E
3-20
1. :FUNCtion2?
Command Format:
:FUNCtion2?
Function:
The comand queries the current measurement of vice-display.
Explanations:
The command is valid only when vice-display is enabled.
Return Format:
The query returns the current measurement of vice-display, such as DCV, ACV,
DCI, ACI, 2WR, CAP, 4WR, FREQ, PERI.
2. :FUNCtion2:VALUe1?
Command Format:
:FUNCtion2:VALUe1?
Function:
The command queries the measured value of the main-display.
Explanations:
The command is valid only when vice-display is enabled.
Return Format:
The command returns the measured value of the main-display.
3. :FUNCtion2:VALUe2?
Command Format:
:FUNCtion2:VALUe2?
Function:
The command queries the measured value of the vice-display.