KACO Powador XP200-HV TL - Manual (Page 85)

Faults and Warnings
Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN Page 85
Message Code Description
Grid Over Frequency F32 Overfrequency on the grid side
Grid Under Frequency F33 Underfrequency on the grid side
Grid CB Trip F34 CB20 (grid circuit breaker) was tripped during operation
Parameters Version Error F40 Version difference between the internal parameter table and the
program parameter table
Flash Memory Failure F41 The flash memory used for programming the DSP C6000 on the
control board has failed.
FPGA Failure F42 FPGA failure in XCU (main control) board
DSP28x Failure F43 DSP F2000 on the control board has failed
ADC Failure F44 The analog-digital converter on the control board has failed
NVSRAM Failure F45 NVSRAM on the XCU (main control) board has failed.
ASYNC Failure F46 ASYNC Warning (W31) has been repeated more than 10 times
CAN Failure F47 CAN communication failure in the CAN network
MC22 Failure F49 MC22 failed.
Emergency Stop F50 The emergency stop (OFF switch) was pressed.
Cabinet Over Temp. F51 Cabinet temperature > 55°C
MMI-XCU Communication Error F63 Communication failure between MMI and XCU board
Table 32: Fault