KACO Powador XP200-HV TL - Manual (Page 26)

Installation
Page 26 Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN
Electrician
7.6 Connecting the interfaces
Overview
2 1 3 4 5
Figure 17: Interface connections (XP250-HV)
Key
1 User interface 4 Analogue user input (UAI)
2 Digital user input/output (UDIO) 5 Remote power control (RPC) for managing grid feed-in
3 RS485
NOTE
The digital, analogue, RS485 and Ethernet connections are designed for SELV.
NOTE
› Use shielded communication cables to improve the resistance of the communication against inter-
ferences.
› Connect the shield to ground potential.
CAUTION
Damage to the inverter due to energized terminals
› Connect only communication cables to the interface connections.
› Use the communication cables only for communication signals.