KACO Powador XP200-HV TL - Manual (Page 76)

Operation
Page 76 Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN
10 Operation
10.1 Starting up the inverter
Starting up the inverter
↺ The inverter was prepared for start-up (see section 7.7 on page 34).
" Use the MMI screen (see section 8 on page 38) to start up the inverter.
ON OFF
PV
generator
Inverter
Grid
Fault History Statistics Setup
701.0V 400.0V
75.8kW 79.0kW
45.0°C
Date/Time
Figure 68: Main screen
2
3
Code Fault message
Fault reset
Fault
L1
L1
L3
L3
L3
back
Figure 69: “Fault” screen
Display Check Action
Error message on the MMI screen NO " On the main screen select the “ON” button.
YES 1. On the main screen press the “Fault” button (see section 12 on
page 83).
2. On the “Fault” screen reset the fault using “Fault reset" (see
section 8.4.5 on page 44).
3. Press the “back” button.
4. On the main screen press the “ON” button.
» The inverter begins operation in a specified sequence (see
section 10.2 on page 77).
NOTE
If the fault cannot be reset using “Fault reset”, contact our service department.