KACO Powador XP200-HV TL - Manual (Page 5)

General notes
Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN Page 5
1.2.3 Depiction of additional information
NOTE
Useful information and notes.
DE
Country-specific functions
Functions that are limited to one or more countries are indicated with country codes according to
ISO 3166-1.
1.2.4 Description of actions
a) One-step instruction or instruction steps that can be performed in any order.
Action
↺ Prerequisite(s) for performing an action (optional)
" Perform this action
" (Possibly additional actions)
» The result of your action(s) (optional)
b) Multi-step instruction with specified order.
Action
↺ Prerequisite(s) for performing an action (optional)
1. Perform first action
2. Perform second action
3. (Possibly additional actions)
» The result of your action(s) (optional)
1.2.5 Abbreviations
BDEW
CB Bundesverband der Energie- und Wasserwirtschaft (German Energy and Water Association)
Circuit Breaker
DSP Digital Signal Processor
FPGA Integrated circuit for digital technology (Field Programmable Gate Array)
FRT Capability of a PV system to remain on the grid during short circuits (Fault Ride Through)
IGBT
MC Semiconductor device (Insulated Gate Bipolar Transistor)
Magnetic Contactor
MMI User interface (Man Machine Interface)
MPP Point of the current-voltage diagram of a solar cell at which the maximum amount of power can be
drawn (Maximum Power Point)
MPPT The MPP tracker adjusts the voltage to the MPP value.
NVSRAM Permanent memory in which fixed parameters are stored (Non-Volatile Static Random Access Memory)
PEBB
Power electronics module (Power Electronics Building Block)
PLL Phase-synchronising circuit (Phase-Locked Loop)
PSIM Master control for the interfaces in the unit (PEBB Signal Interface Master)
PWM Pulse Width Modulation
SELV
SPD Safety Extra-Low Voltage
Surge Protection Device