KACO Powador XP200-HV TL - Manual (Page 63)

Configuration
Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN Page 63
9.1.2 Configuring the RS485-2 interface (Powador-proLOG)
ON OFF
PV
generator
Inverter
Grid
Fault History Statistics Setup
701.0V 400.0V
75.8kW 79.0kW
45.0°C
Date/Time
Digital Date/Time
Setup (1/2)
Analog Recording
Language &
Country
RS485 User
configuration
Network
back
5. On the main screen press the “Setup” button.
6. On the “Setup“ screen press the “RS485“ button.
1
2
RS485
MMI RS485 Role
MMI RS485 Address
Positive Sequence Enable
Prolog Protocol
Powador-go/Argus Enable
None
0
OFF
0
OFF
Set
Set
Set
Set
Set
back
MMI RS485 Role
None
back
Slave
Save
Slave
1
2
Master
7. On the “RS485“ screen press the “Set“ button for “MMI RS485 Role“.
8. On the “MMI RS485 Role“ screen press the “Slave“ button.
9. Press the “Save“ button.
1
2
RS485
MMI RS485 Role
MMI RS485 Address
Positive Sequence Enable
Prolog Protocol
Powador-go/Argus Enable
Slave
0
OFF
0
OFF
Set
Set
Set
Set
Set
back
1
2
RS485
MMI RS485 Role
MMI RS485 Address
Positive Sequence Enable
Prolog Protocol
Powador-go/Argus Enable
Slave
0
OFF
0
OFF
Set
Set
Set
Set
Set
back
10. On the “RS485“ screen check if the “MMI RS485 Role” status was changed to “Slave”.
11. Press the “Set“ button for “MMI RS485 Address“ and input 0 or a value between 2 and 99.
NOTE
Do not set 1 for “MMI RS485 Address” because the role of ProLOG is Master.