KACO Powador XP200-HV TL - Manual (Page 61)

Configuration
Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN Page 61
9 Configuration
9.1 Configuring the interfaces
9.1.1 Configuring the RS485-1 interface (Powador Argus)
↺ The RS485-1 interface is connected (see section 7.6.2 on page 29).
ON OFF
PV
generator
Inverter
Grid
Fault History Statistics Setup
701.0V 400.0V
75.8kW 79.0kW
45.0°C
Date/Time
Digital Date/Time
Setup (1/2)
Analog Recording
Language &
Country
RS485 User
configuration
Network
back
1. On the main screen press the “Setup” button.
2. On the “Setup“ screen press the “RS485“ button.
1
2
RS485
MMI RS485 Role
MMI RS485 Address
Positive Sequence Enable
Prolog Protocol
Powador-go/Argus Enable
None
0
OFF
0
OFF
Set
Set
Set
Set
Set
back
Powador-go / Argus Enable
OFF
back
ON
Save
ON
1
2
3. On the “RS485“ screen press the “Set“ button for “Powador-go / Argus Enable“.
4. On the “Powador-go / Argus Enable“ screen press the “ON“ button.
5. Press the “Save“ button.
1
2
RS485
MMI RS485 Role
MMI RS485 Address
Positive Sequence Enable
Prolog Protocol
Powador-go/Argus Enable
None
0
OFF
0
ON
Set
Set
Set
Set
Set
back
Digital Date/Time
Setup (1/2)
Analog Recording
Language &
Country
RS485 User
configuration
Network
back
6. On the “RS485“ screen check if the “Powador-go / Argus Enable” status was changed from “OFF” to “ON”.
7. On the “Setup“ screen press the “Digital” button.