KACO Powador XP200-HV TL - Manual (Page 13)

Transportation and Delivery
Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN Page 13
5 Transportation and Delivery
5.1 Delivery
The inverters leave our factory in proper electrical and mechanical condition. Special packaging ensures
that they are transported safely. The shipping company is responsible for any damage that occurs during transpor-
tation.
Scope of delivery
• Powador XP200-HV / Powador XP250-HV
• Documentation
• Material for electrical connection
Identification
The inverters are transported and delivered in two separate parts.
Each part is equipped with a name plate mounted on the inside of the left cabinet door. The name plates identify
the inverter.
Check your delivery
" Make sure that both parts of the inverter are delivered, part A and part B.
" Make sure that the serial numbers of part A and part B are identical. The serial numbers are to be found on the
name plates.
Only inverters with the same serial number for parts A and B are to be used together.
" Inspect the inverter thoroughly.
" Notify the shipping company immediately if you discover any damage to the packaging which indicates that
the inverter may have been damaged or if you discover any visible damage to the inverter.
" Send the damage report to the shipping company right away. It must be received by them within six days fol-
lowing receipt of the inverter. We will be glad to help you, if necessary.
" Notify Kaco new energy GmbH if the inverter cabinets have different serial numbers.
5.2 Transportation
DANGER
Danger by falling objects, impact or tipping of the inverter
Falling objects may hit persons or damage the inverter.
› When transporting the inverter, make sure that nobody stands beneath the inverter.
› Transport the inverter in an upright position. Do not tilt the inverter.
› Only use lifting devices with a load capacity sufficient for lifting the inverter.
› Transport the inverter only in its original packaging.
CAUTION
Risk of damage to the inverter
The inverter cabinets are very heavy. The eyebolts on the top of the cabinets may break when using
lifting straps without a lifting frame.
› At installation site transport the inverter only with:
– forklift or lift truck,
– crane fork,
– crane with lifting frame attached to the eyebolts.