KACO Powador XP200-HV TL - Manual (Page 48)

User interface
Page 48 Operating Instructions Powador XP200-HV TL, XP250-HV TL, XP350-HV TL_EN
8.4.8.4 Language and country settings
NOTE
Improper parameters will render the system inoperable. Select only the country-specific settings for
your country.
Setting the language
" Press the appropriate button for your language. This sets the display language for the MMI.
Available languages: English, German, Spanish, Korean, French, Italian.
Setting country-specific parameters
" Press the button that shows the flag of your country.
» The parameters for the country-specific power grids are stored.
Language & Country
Deutsch
back
English Español
Français 한국어 Italiano
DE ES FR
ZH CY CZ
IT KR GR
GB
Language: English Country: DE
Figure 55: “Language & Country” screen”
8.4.8.5 Network
Configuring the network for the MMI
" Select static and dynamic IP addresses via DHCP service requests.
" Change the Web port used for monitoring the inverter via the Web.
" Open the Web monitoring service using the MMI's IP address and Web port (e.g. http://192.168.10.11:82).
Network
Config
IP
Netmask
Gateway
Web Port
Static
192.168.10.11
255.255.255.0
192.168.10.1
82
Set
Set
Set
Set
Set
back
Figure 56: “Network” screen