Yaskawa Junma Series SERVOPACK - Manual (Page 88)

7.3 Replacement of Cooling Fan
E-87
English
4. Remove the two mounting screws of
the cooling fan.
5. Install the new cooling fan.
Thread the cooling-fan cable through
the opening (
) as shown in the dia-
gram A.
CAUTION: Make sure that the arrow on
the heatsink and the arrow on
the fan face the same direction
as shown in the diagram B.
6. Secure the fan on the SERVOPACK
with mounting screws.
Cooling fan
Mounting screws
C
Diagram A
Diagram B
C
Make sure the direction
of the arrows on the fan
is the same as this diagram.