Yaskawa Junma Series SERVOPACK - Manual (Page 66)

5.9 Alarm Display
E-65
English
„ Warning List
System error
A.020 Parameter Error 0 N/A
A.021 Parameter Error 1 N/A
A.022 Parameter Error 2 N/A
A.023 Parameter Error 3 N/A
A.030 Main Circuit Detector Error N/A
A.040 Parameter Setting Error N/A
A.b33 Current Detection Error N/A
A.bF0 System Alarm 0 N/A
A.bF1 System Alarm 1 N/A
A.bF2 System Alarm 2 N/A
A.bF3 System Alarm 3 N/A
A.bF4 System Alarm 4 N/A
A.bFA System Alarm A N/A
Warning
ALARM LED
Display
Warning Code Warning Name
Servo Setup
• Rotary switch change
• Parameter change
A.941
Setting changed for parameters
requiring restart
A.94E
PULSE setting changed (rotary
switch)
Note: The alarm classification LED has priority over
the alarm LED for warning. Alarm LED for
warning will not blink until the alarm is cleared.
Overload A.910 Overload
Alarm
ALARM LED
Display
Alarm Code Alarm Name Alarm Reset
ALM1
ALM2
ALM3
ALM1
ALM2
ALM3
Blinks at regular
intervals
ALM1
ALM2
ALM3