Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 58)

58 VS-616PS5 Programming Manual
F8 PG Option Set-up 2
Setting Range: 0,1
Factory Default: 1
Selects the speed feedback method (hall sensor or line drive encoder).
Setting Range: 0 - 50
Factory Default: 0
Sets the number of scans the Pulse Train reference is averaged. A larger number will
provide a more stable speed reference signal, however, the inverter response to a
rapid change in reference may be slower.
A setting of “0” or “1” means no moving average will be used, and the pulse train ref-
erence will be updated every scan.
F8-01 Speed Feedback Detection Method Q
Setting Description
0 Speed feedback comes from channels A & B on PG-P2 option
1 Speed feedback comes from channels HS4 & HS5 input on PG-P2 option
F8-01 Pulse Train Average Value B
Section F: Option Parameters
F8-01 Speed Feedback Detection Method