Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 55)

VS-616PS5 Programming Manual 55
Setting Range:
±300.0
Factory Default: 1.0
Sets the channel 1 output gain for the analog output monitors. To obtain the output
level, multiply the monitor output level by the gain value set in this parameter (F4-02).
Setting Range:
±109.2%
Factory Default: 0.0%
Sets the channel 1 output bias for the analog output monitors. To determine the out-
put level, add the bias value set in F4-03 to the monitor output level.
Setting Range: Same as F4-01
Factory Default: Inverter output current (setting = “3”)
Select the analog output monitors for channel 2 of the AO-08 and AO-12 options.
Select from the table included in parameter F4-01.
Setting Range:
±300.0
Factory Default: 1.0
This parameter sets the channel 2 output gain for the analog output monitors. To
determine the output level, multiply the monitor output level by the gain value set in
this parameter F4-05.
Setting Range:
±109.2%
Factory Default: 0.0%
Sets the channel 2 output bias for the analog output monitors. To determine the out-
put level, add the bias value set in F4-06 to the monitor output level.
F4-02 Analog Output Channel 1 Gain A
F4-03 Analog Output Channel 1Bias A
F4-04 Analog Output Channel 2 Selection A
F4-05 Analog Output Channel 2 Gain A
F4-06 Analog Output Channel 2 Bias A
Section F: Option Parameters
F4 AO-08/AO-12 Set-up