Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 54)

54 VS-616PS5 Programming Manual
F4 AO-08/AO-12 Set-up
Setting Range: 1 to 53
Factory Default: 5
Selects the analog output monitors for channel 1 of the AO-08 and AO-12 options.
Possible settings are as follows:
F4-01 Analog Output Channel 1 Selection A
Setting Description
1 Speed reference
2 Output frequency
3 Inverter output current
5 Motor speed (factory default)
6 Output voltage
7 DC bus voltage
8 Output power
9 Torque reference (internal)
15 External terminal 13 input voltage
16 External terminal 14 input voltage
17 External terminal 16 input voltage
18 Motor secondary current (Iq)
19 Motor excitation current (Id)
20 Primary frequency after SFS
21 Speed controller ASR input
22 Speed controller ASR output
27 qAxis current control reference
28 dAxis current control reference
29 Voltage limit control output
30 qAxis current control output
31 dAxis current control output
32 Output voltage reference (V
q
)
33 Output voltage reference (V
d
)
45 External torque reference
46 Torque compensation value
49 Control section software number
50 Speed detection PG counter value
53 PID feedback
Section F: Option Parameters
F4 AO-08/AO-12 Set-up