Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 33)

VS-616PS5 Programming Manual 33
Setting Range: 0 - 1000
Factory Default: 0
Sets the denominator portion of the pulse reference multiplication block. Used when
B1-02=6 (Pulse Train reference mode).
Setting Range: 0 - 1000
Factory Default: 0
Sets the numerator portion of the pulse reference multiplication block. Used when
B1-02=6 (Pulse Train reference mode).
C6-13 Pulse Reference Ratio Denominator Value A
C6-14 Pulse Reference Ratio Numerator Value A
Speed Reference
C6-14
C6-13
1/100
Pulse
Reference
Section C: Tuning Parameters
C6 Carrier Frequency