Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 56)

56 VS-616PS5 Programming Manual
F5 DO-02 Set-up
Setting Range:
0 to 37
Factory Default: During run 1 (setting = “0”)
Selects the multi-function output selections for channel 1 of the DO-02C option.
For detailed information on these settings, refer to section H2, Digital Outputs.
Setting Range: Same as F5-01
Factory Default: Zero speed (setting = “1”)
Use this function to select the multi-function output selections for channel 2 of the
DO-02C option.
F5-01 DO-02C Digital Output Channel 1 Selection A
Setting Description Setting Description
0 During run 1 (factory default) 12 Timer output
1 Zero speed 13 Agree 2
2 Sref/Sout agree 1 14 Agree 2
3 Sref/Sset agree 1 15 Speed detection 3
4 Speed detection 1 16 Speed detection 4
5 Speed detection 2 17 Torque detection 1(N.C.)
6 Inverter ready 18 Torque detection 2 (N.O.)
7 DC bus undervoltage 19 Torque detection 2 (N.C)
8 Baseblock 1 1A Reverse direction
9 Option reference 1B Baseblock 2
A Remote operation 1D Regenerating
B Torque detection 1 (N.O.) 1E Restart enabled
C Loss of reference 1F Overload (OL1)
D DB overheat 20 OH prealarm
E Fault 30 Current/torque limit
F Not used 31 Speed limit
10 Minor fault 37 During run 2
11 Reset command active 37
F5-02 DO-02C Digital Output Channel 2 Selection A
Section F: Option Parameters
F5 DO-02 Set-up