Yaskawa VS-616PS5 Series Programming Manual - Manual (Page 13)

VS-616PS5 Programming Manual 13
This parameter determines how the inverter will function when switching from local to
remote operation when the external run command is applied.
1 Baseblock (factory default)- No output to motor
2 Run at minimum output speed (E1-08).
3 Zero-speed operation (internal speed reference is set to “0”)
B1-06 LOCAL/REMOTE Run Select A
Selection Description
0 Operation is disabled if the external run command is applied
prior to switching from local to remote. The run command
must be removed and re-applied to start operation.
1 Operation is enabled if the external run command is applied
prior to switching from local to remote.(factory default).
Setting Description
Section B: Application Parameters
B1 Sequence